0rrodrig@teknowledge-vaxc.ARPA (Russ Rodriguez) (04/02/89)
Greetings Programmers: I'm interested in getting my old AST ADVANTAGE! (1.5mb EXTENDED MEM) to act as EMS or EXPANDED memory. Unfortunately for me, the 1985-Vintage card doesn't seem to have a proviso for EMS. So the obvious question: Can this card be used within an IBM-Compatible AT to perform the EMS function with the proper EMS device driver? NOTE: I tried using a shareware version of an EMS 3.2 driver called "EMSimulator", but it wouldn't see the memory above the 640k of system board memory, although it allocated about 200k of the DOS memory as EMS. I also tried using Intel's Above Board driver: EMM.SYS, but it balked at the non-intel card. Any help would be appreciated. -- Russell Rodriguez ------------------------------------------------------------------------------ Disclaimer: The opinions of Russ Rodriguez are his own and couldn't possibly reflect those of Teknowledge, Inc., of Palo Alto, California ------------------------------------------------------------------------------ internet: 0rrodrig@teknowledge-vaxc.arpa usenet: {uunet|sun|ucbvax|decwrl|uw-beaver}!0rrodrig%teknowledge-vaxc.arpa home: 2420 Slater Street, Santa Rosa, CA., 95404-2143 Phone: 707-571-8172