wainscot@jif.berkeley.edu (Brian Wainscott) (04/09/89)
Thanks to all of you who helped with my procomm problems. Here's
the current status (please read on -- I still need help).
I can download fine at 2400 baud, and upload at 1200, but cannot
upload at 2400 baud, even in ascii! After a seemingly good start
(3 lines ascii, sometimes as much as 2 blocks in xmodem) the system
locks and nothing short of ctl-alt-del gets any response.
Any comments or suggestions would be greatly appreciated.
My current setup is as follows:
AT clone (with which I have had NO problems) at 10Mhz
Anchor 2400i internal modem on com4 (100% Hayes compatible)
(mouse on com1, which is why modem is where it is)
Procomm 2.4.2
files = buffers = 40
I'm trying to talk to a Unix system.
All ideas welcome. Thanks for the help!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brian Wainscott Graduate Student U.C. Berkeley
wainscot@math.berkeley.edu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Brian Wainscott Graduate Student U.C. Berkeley
wainscot@math.berkeley.edu
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~