pcolsen@super.ORG (Peter C Olsen) (07/27/89)
Newsgroups: comp.sys.ibm.pc Subject: Need DVI driver for 24-pin printer Summary: Expires: Sender: Reply-To: pcolsen@.super.org (Peter C Olsen) Followup-To: Distribution: Organization: Supercomputing Research Center, Lanham, Md. Keywords: TeC, dvi, device driver, Epson, Pansonic, KXP-1124 I need a .dvi device driver for a 24-pin Pansonic KXP-1124 dot-matrix printer to run on a PC-clone under MSDOS. The KXP-1124 will emulate an Epson LQ 2500 or an IBM Proprinter, so a driver for either of those will work. I would like a driver which will take advantage of the KXP's 360x360 dpi graphics. I've got a copy of a 9-pin driver based on Nelson Beebe's code but I need better resolution. I could probably modify his source if I understood it. Peter Olsen pcolsen@super.super.org polsen@dockmaster.ncsc.mil uunet!super!pcolsen