mikef@portia.Stanford.EDU (Michael Fallavollita) (08/16/89)
HELP!!!
We have recently installed ethernet boards in our four PCs, (1 Model 60,
1 Model 80, and 2 AT's) but we really need to be able to access the
laser printers that are connected to the AppleTalk network in our building.
The AppleTalk network is connected to ethernet via kinetics boxes.
Does anyone know of anyway to access the AppleTalk zones from our PC's?
We run NCSA Telnet on the PC's so we don't have any loaded device drivers
for the ethernet cards. If needed we could use the packet drivers
supported by NCSA Telnet if there was an application that would run
with those drivers.
Any comments or suggestions would be greatly appreciated.
_____________
| |
| Mike's |
| 386 |
|____ _____| Michael Fallavollita
| | mikef@portia.stanford.edu
----------------------
| [ ] [ ]|
| [ ]|
----------------------