dono@attctc.Dallas.TX.US (Don OConnell) (08/24/89)
Typical conversions from ascii keys to the ibm terminal translation are: IBM ASCII clear ctrl z (clear on the ibm end) pa1 ctrl t pa2 ctrl y reset ctrl r erase eof ctrl c newline ctrl g (not enter key) pf(1-10) esc esc (1-0) pf11 esc esc q pf12 esc esc w pf13 esc esc e pf14 esc esc r pf15 esc esc t pf16 esc esc y pf17 esc esc u pf18 esc esc i pf19 esc esc o pf20 esc esc p pf21 esc esc a pf22 esc esc s pf23 esc esc d pf24 esc esc f I use these all the time from kermit using vt102 emulation, I have used them in the past with procomm 2.42 vt100 emulation at several different places of employement. Don O'Connell attctc