don.buchanan@canremote.uucp (DON BUCHANAN) (10/21/89)
I've been using the arc and dearcing (Narc) but you folks use .ZIP (.) Where is that program? And how can I upload if I can't create .ZIP files? I'll get back to you this weekend. I look forward to a reponse. See you later!!!! --- * Via ProDoor 3.1R ~ RNet 1.03F: . CanConfMail / Oasis BBS (613) 236-1730 Ottawa, CANADA
ben.pedersen@canremote.uucp (BEN PEDERSEN) (10/22/89)
Howdy Don, You asked, DB>I've been using the arc and dearcing (Narc) but you folks use .ZIP (.) DB>Where is that program? And how can I upload if I can't create .ZIP DB>files? I'll get back to you this weekend. I look forward to a reponse. DB>See you later!!!! You should look for the Phil Katz ZIP utility. The latest version is available as 'PKZ102.EXE'. You just run the executable file and it will create the ZIP and UNZIP utilities on your disk in addition to various bits of documentation. You might find that you local board only has 'PKZ101.EXE' which is alright as well since the update to v1.02 was not a significant one. Do not obtain 'PKZ092.EXE' however since it does not have the ability to handle the newer compression technique employed by the latest version. ZIP is used pretty much the same way as ARC although if you have been using NARC you will have to remember that there are separate utilities for creating, and for extracting from, ZIP files. --Regards! --- * QDeLuxe 1.10 #2134 Is that the cunning of reason...