root@csoftec.csf.com (Cliff Manis (cmanis@csoftec)) (11/29/89)
Would someone PLEASE .... HELP !
When moving from DOS back to Xenix ! ! !
I want to change from DOS to Xenix, using a batchfile.bat <goxenix
and have this done in the background i.e. no (flashing/blinking screens)
as it is going back to xenix as the fdisk program is getting input from
goxenix file. My particular fdisk program requires input as follows:
2
2
ESC ESC (ESC = ESC key)
and that's all ...and I would appreciate any help.
Thanks ... cliff
_
Cliff Manis \o^o/ K4ZTF Unix & Xenix today for a better tommorrow!
---===+++***### INTERNET: cmanis@csoftec.csf.com ###***+++===---
UUCP: {dpmizar|swrinde|texbell}!csoftec!cmanis ARPA: hcscm@altos.af.mil
-gs940971@longs.LANCE.ColoState.Edu (glen sunada f84) (11/29/89)
In article <533@csoftec.csf.com>, root@csoftec.csf.com (Cliff Manis (cmanis@csoftec)) writes: (trimed) > Would someone PLEASE .... HELP ! > When moving from DOS back to Xenix ! ! ! > I want to change from DOS to Xenix, using a batchfile.bat <goxenix > and have this done in the background i.e. no (flashing/blinking screens) > as it is going back to xenix as the fdisk program is getting input from > goxenix file. My particular fdisk program requires input as follows: > 2 > 2 > ESC ESC (ESC = ESC key) Why use fdisk to go between DOS and Xenix. I have tested Xenix for possible inclusion on isolated PC's here at Colorado State University. When doing so I found quite by accident that at the Xenix Partion managaer (bootstar loader) prompt of boot? if you type in dos the DOS partition is automatically booted. That way you always get back to Xenix when you reboot unless you specifically request DOS. BTW this mechanism can also be used to test nex Xenix kernels. To do this name the new kernel something like xenix.new and at the boot? prompt type in xenix.new. Then if the new kernel works rename the old kernel xenix.old and the new kernel xenix. Glen U. Sunada gs940971@longs.LANCE.ColoState.EDU ARPA Internet (preferred) ...!ncar!boulder!ccncsu!longs.LANCE.ColoState.EDU!gs940971 UUCP We have only ignorence to fear
wcr@branch.FIDONET.ORG (W.c. Rothanburg) (12/01/89)
In an article of <29 Nov 89 02:01:03 GMT>, root@csoftec.csf.com (Cliff Manis (cmanis@csoftec)) writes: >goxenix file. My particular fdisk program requires input as follows: >2 >2 >ESC ESC (ESC = ESC key) > >and that's all ...and I would appreciate any help. > Try using KEY-FAKE. I beleive it was in pc-mag. Bill -- --------------------------------------------------------------------+ "Out on a Limb in The Branch Office...." ] ] Fidonet : 1:369/11 The Branch Office. (branch.FIDONET.ORG) ] 1:369/0 Treasure Coast Net. ] UUCP : {sun!hoptoad, attctc, <internet>!mthvax}!ankh, ] gatech!uflorida!novavax!branch!wcr ] ] INTERNET: wcr@branch.FIDONET.ORG -or- wcr@f11.n369.z1.FIDONET.ORG ] BBS : +1 305 979-2073 ] 'I was asking for it.....' ] --------------------------------------------------------------------+
mikes@NCoast.ORG (Mike Squires) (12/03/89)
In article <533@csoftec.csf.com> root@csoftec.csf.com (Cliff Manis (cmanis@csoftec)) writes: > >I want to change from DOS to Xenix, using a batchfile.bat <goxenix >and have this done in the background i.e. no (flashing/blinking screens) >as it is going back to xenix as the fdisk program is getting input from >goxenix file. My particular fdisk program requires input as follows: >2 >2 >ESC ESC (ESC = ESC key) > >and that's all ...and I would appreciate any help. > If there is a MS-DOS partition (inactive) and a XENIX partition (active) on your HD you can boot DOS by typing DOS at the XENIX boot prompt. What am I missing? (I have a 32MB DOS partition on my primary which is usually D: for VP/ix, but I can boot DOS if I wish).