msmith@topaz.rutgers.edu (Mark Robert Smith) (11/30/89)
I have a problem with Xtalk XVI. Ever since we moved the modem from an old XT to a new Compaq 286, Xtalk won't dial the number, since the 45 second count goes by in 2 seconds! (due to the clock speed, I guess). Is there a way to get it to wait longer, or adjust the timing? Or do we have to get Xtalk Mk.4? Thanks. Mark -- Mark Smith, KNJ2LH All Rights Reserved RPO 1604 You may redistribute this article only if those who P.O. Box 5063 receive it may do so freely. New Brunswick, NJ 08903-5063 msmith@topaz.rutgers.edu
barry@dgbt.uucp (Barry McLarnon DGBT/DIP) (12/06/89)
From article <Nov.29.16.36.10.1989.5553@topaz.rutgers.edu>, by msmith@topaz.rutgers.edu (Mark Robert Smith): > I have a problem with Xtalk XVI. Ever since we moved the modem from > an old XT to a new Compaq 286, Xtalk won't dial the number, since the > 45 second count goes by in 2 seconds! (due to the clock speed, I > guess). > > Is there a way to get it to wait longer, or adjust the timing? Or do > we have to get Xtalk Mk.4? I noticed that problem too - it caused me to switch to Telix! Xtalk XVI really is getting long in the tooth... however, I suspect this particular problem is fixed in the latest release (3.7). Contact Crosstalk for upgrade info. > Thanks. > Mark Barry -- Barry McLarnon Communications Research Center Ottawa, ON Canada UUCP: ...utzoo!bnr-vpa!bnr-rsc!dgbt!barry INTERNET: barry@dgbt.crc.dnd.ca Compu$erve: 71470,3651 Packet radio: VE3JF @ VE3JF