harty@masscomp.ccur.com (Kevin Harty) (01/08/90)
I'm having problems loading rev 5.0 of microsoft C. When I "cl" anything I get, switch "/NOI" unreconized. I've reloaded this sucker 5 times , same results. Anyone else seen this ? P.S. BTW I'm not using the NIO switch and can't find anything that enables me to disable it. It's the default. kjh
miller@b-mrda.boeing.com (Mark Miller) (01/10/90)
Check to see if you have an older version of LINK.EXE still in the
path (say, from an assembler or an older version of QuickC or MSC). I had
a similar problem, and I had an old version of link sitting in the path
from installing MASM. If you find an old LINK.EXE, remove it and replace it
with the current one. LINK.EXE is compatible with previous versions. The
problem occurred because MAKE and CL search the path for LINK, and will run
the first version they find.
I have no connection whatsoever with MicroSoft.
K
======================================================================
Mark R. Miller + Disclaimer: Opinions expressed
Boeing Commercial Airplane Co. + are mine and mine alone, and
Seattle, WA + not necessarily those of my
Internet: miller@b-mrda.boeing.com + employer.
Voicenet: (206) 237-0960 +
+ +++ Phillipians 4:13 +++
======================================================================