jwhitson@wpi.wpi.edu (John C Whitson) (05/02/89)
Does anyone know how to configure a Western Digital Hard/Floppy Disk Controller Card # WD1002-WA2 (year 1984 for an AT; 16 bit) for a Seagate ST-251-0 (40ms 42.8MB) hard disk? In particular, jumper positions are needed. I know how to set the software. If necessary, the BIOS is Award Version 3.01B. Thanks in advance.... --------------------------------------------------------------------------- John Whitson: Internet: jwhitson@wpi.wpi.edu Bitnet: jwhitson@wpi.bitnet -- --------------------------------------------------------------------------- John Whitson: Internet: jwhitson@wpi.wpi.edu Bitnet: jwhitson@wpi.bitnet
jjohnson@urbana.mcd.mot.com (Jeff Johnson) (05/02/90)
birdsall@cs.hope.edu writes: >> I need some controler doc's. Does anyone know the most effective route >>to take. My local dealers have been unable to help. Thanks ahead of time... kaleb@mars.jpl.nasa.gov writes: >Yup, just call them! I don't have the number here at work, or I'd publish >it. WD is here in Orange county (714 area code) Call long distance >information and get the number. They've always be pretty responsive -- two >to three days. I just called their Literature Department and they sent me the requested documents within 2 days. Western Digital Literature Department 1-800-832-4778 Western Digital Main Office 1-800-433-5760 These numbers might not work within CA. (I called from Illinois.) -- Jeff Johnson +1 217 384 8542 Motorola Inc ...!udc!jjohnson Urbana Design Center jjohnson@urbana.mcd.mot.com 1101 E. University Ave. "I said what I said, and my employer did not." Urbana, IL 61801