jca@pnet01.cts.com (John C. Archambeau) (05/05/90)
I just inherited what appears to be a Rodime RO352 hard drive. The problem is
that I don't know what the proper configuration is to set the thing to drive
select two and hang it off my 16-bit hard drive controller as drive 2. I'm
certain it's a 20 Mb drive since the label on it says "Type 2" which implies
its parameters are identical to a Seagate ST225. Ok, great, now what's the
proper jumper settings under the drive to hook the thing to my 386SX with
WA3-16 controller? Any help will be appreciated.
BTW, I know it's an ST412/506 drive judging from the connections from the
drive to the controller. Two edge connections that are keyed.
// JCA
/*
**--------------------------------------------------------------------------*
** Flames : /dev/null | Xenix is the ONLY thing
** ARPANET : crash!pnet01!jca@nosc.mil | Microsoft did right.
** INTERNET: jca@pnet01.cts.com
** UUCP : {nosc ucsd hplabs!hd-sdd}!crash!pnet01!jca
**--------------------------------------------------------------------------*
*/crmeyer@voodoo.ucsb.edu (05/06/90)
In article <2523@crash.cts.com>, jca@pnet01.cts.com (John C. Archambeau) writes... >I just inherited what appears to be a Rodime RO352 hard drive.... According to my data, the drive stats are as follows: 3.5" drive type 11 MB capacity 306 cylinders 4 heads Start reduced write current = 64 start write precomp = 128 85 ms avg acess time 17 sectors per track