davev@usbcae.UUCP (Dave van De Kerk) (06/05/90)
Hello. We're running a Novell file server (Everex Step) with Novell netware 2.15. When we connect to the server, then get into a communications program like Procomm or Xtalk or Procomm+, then you are no longer attached to the server when you exit and you can not execute net3 to reattach to the server. We mapped the interrupts, before and after ProComm, and they are changed. How do we avoid this, or how do we re-map the interrupts without re-booting the system? Please reply by e-mail. I will post any operational answer to the net, if there seems interest. Thank you very much. -- This message is not a statement of any person or any official of any government agency. Std. Disclaimer Form, [Rev 05-01-90] ucdavis.ucdavis.edu!spked!usbcae!davev att.com!pacbell!sactoh0!usbcae!davev uunet.uu.net!spao!usbcae!davev