lars@iclswe.icl.se (Lars Tunkrans) (06/14/90)
I am running what I belive is an ACER 386SX system with one MB store. I
will upgrade this to 4 Mb.
I am runnig QEMM 5 and DV 2.26 with Manifest.
I got two problems:
1. It is impossible to control Manifest. Only if I load the
Keyboard.sys and Mouse.sys in the same region in High RAM it runs but
then the system crashes when I exit from Manifest.
2. I am using a vt220 terminal emulator over Ethernet with the BICC
lanboard installed at adress D000 IRQ 3. I am Using the ISOLAN driver to
this board. The emulator uses a TSR to do help functions and so on.
after I loaded QEMM its almost impossible to wake up the TSR. Only If
you press all keys on keyboard simultaneously for awhile it wakes up.
Any advice ? please !
PS: I normally play with unix. DS:
--
Lars Tunkrans Phone +46 (0)76096368. | The ICL DRS6000 SPARC system is still
DRS Systems Support. | the only off the shelf deliverable
UUCP: uunet!mcsun!sunic!iclswe!lars | Unix System V Release 4.0 system.
DOMAIN Address : lars@iclswe.icl.se |