news@udenva.cair.du.edu (netnews) (07/17/90)
i can't make WP50 work under DV 2.26 it says i'm out of memory, but i get this even when i have no other windows open, any ideas? i tried to tell DV that WP50 needs 280k, and that it writes directly to the screen , and now i'm getting a register dump, with some bogus error, with the terminate, reboot, or continue BS. any help appreciated, preferably e mail. thnx tim
reisert@ricks.enet.dec.com (Jim Reisert) (07/17/90)
In article <13476@udenva.cair.du.edu>, news@udenva.cair.du.edu (netnews) writes... >i can't make WP50 work under DV 2.26 >it says i'm out of memory Sorry, Tim, our mailer is down at the moment. Get out of DESQview. Change your directory to your WP directory, and use LOADHI to start the program: C:\WP>LOADHI /GS WP50 Make sure that the directory LOADHI is in is in your path. When you exit WP50, it will tell you how much memory was required to run. Then edit your program information screen in DESQview to start WP50 with that much memory. One other thing you can try in desparation is change the protection when you run WP50 from 0 to 3, and you might get a better error message. jim =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= "The opinions expressed here in no way represent the views of Digital Equipment Corporation." James J. Reisert Internet: reisert@ricks.enet.dec.com Digital Equipment Corp. UUCP: ...decwrl!ricks.enet!reisert 77 Reed Road Hudson, MA 01749-2895