starner@ISF.Unisys.COM (Mark Starner) (07/23/90)
I am trying to add a Hitachi DK511-5 to my AT clone. I set the CMOS to the right type. when I try the drive alone all is fine... but when i connect it in with my 1st drive, a NEC D5146H, nothing works right. I suspect the drive select on the Hitachi is incorrect. Would anyone out there have the jumper settings i need for this drive? The Hitachi is a ST-506 drive, 5.25 form factor, Full height drive, 40MB, 699 Cyl, 7 heads, MFM encoding, 30 ms access time. Here is my config: Controller: WD1003-WAH 1st Drive: NEC D5146H 2nd Drive: Hitachi DK511-5 Thanks ------------- Mark Starner Unisys Corporation/Integration Support Facility starner@isf.unisys.com -- ------------- Mark Starner Unisys Corporation/Integration Support Facility starner@isf.unisys.com