jeffm@mmintl.UUCP (06/11/87)
* Please excuse me. I stated in an earlier posting that using PC-DOS 3.1 on my 6300, as long as I had the 3Com ethernet driver enet.sys loaded, my clock worked. That was wrong. It turns out that I've been setting the time from the network ALL THIS TIME!!!!! I can't believe it. I'm so disappointed. But I have modified for Lattice the WRATTCL.C and RDATTCL.C programs posted earlier written by Bernie Roehl. They work. So now when I boot RDATTCL.EXE runs and reads the hardware clock and sets the DOS time. The hardware clock was set previously with WRATTCL.EXE. I recommend these programs. Sorry about that. Jeff * Jeff Miller * * Multimate International, an Ashton-Tate Co. * * 52 Oakland Avenue, East Hartford, CT 06108-9911 * * (203) 522-2116 x257 UUCP: ...!seismo!utah-cs!utah-gr!pwa-b!mmintl!jeffm * -- * Jeff Miller * * Multimate International, an Ashton-Tate Co. * * 52 Oakland Avenue, East Hartford, CT 06108-9911 * * (203) 522-2116 x257 UUCP: ...!seismo!utah-cs!utah-gr!pwa-b!mmintl!jeffm *