gah@blft1.UUCP (Gregg Houck SysOp) (02/08/88)
Hi Netlanders, I try and think of myself as pretty good at handeling UNIX communications. My experence has been with SYS V.1 and .2 with a little BSD thrown in. I have setup I'd say, 20 to 25 UNIX based systems all with uucp and remote dialup's.. Now. I am trying to get a simple little hayes modem to work on a 3B2/310 using SYS V.3 .. I said to myself, ok simple and tryed to set it up. BOOM!!! I thought I had checked everything, and as far as I can tell IT SHOULD WORK!!! Here is the problem. Trying to send mail to another System then 3b2 dials the other site ok, the modem detects the carrier, speaker goes silent and the rd light on the modem flashes (Login prompt from other system).. At this point rd stops and sd never starts. The system I am calling has a working autobaud setup. She sits there on-line waiting several minutes then sd flashes with a return flash on rd and nothing else. This happens once more then either the remote or the 3b2 disconnects. The 3b2 log says TIMEOUT LOGIN, then FAILED call to cl504 etc..... Any ideas??? Thanks in advance.. Gregg Houck : ..psuvax1!blft1!gah | NITTANY LION COUNTRY ComputerLand of State College PA | GOoooo LIONS! (814)-355-9163 Home - (814)-237-9000 Work | WE'RE #1