bob@rush.cts.com (Bob "Rush" Ames) (05/21/88)
In article <4813@ihlpf.ATT.COM>, gmark@ihlpf.ATT.COM (Stewart) writes: > A while ago, someone stated on the net that they made a practice of > leaving the diagnostic disk in, so that, in the event of a power > problem, it would start to boot and sit there. This would prevent > the repeated cycling that could damage the HD. Has anyone been > doing this, and has ANYONE had any problems with it? Might it be a > better idea to switch the power through a latched relay, so that > [...] I think that the poor man's solution to this is this GREAT idea by Mark. I don't see any problems with leaving the diagnostic disk in. I believe AT&T recommends that this machine be left on 24 Hours a day. I do this, but in addition to this, I recommend performing a shutdown and leave the machine at the 'Ready to press <RETURN> to re-boot' prompt if you don't plan to use your machine for a couple of days. With this new idea, you can have your cake and eat it too. Just shutdown, leave diagnostic disk (copy) in the drive, and leave the power on. With 3.5 or greater, the screen blanking will automatically dim the console. The latched relay is the better solution though. BTW: I've calculated that my machine costs about $15.00 per month to keep on 24Hours a day. This is based on San Diego Gas & Electric company's third-highest-in-the-nation electric rates. Your costs will probably be lower. So leave your computer on and make it last. Does anyone disagree with AT&T's recommendation to keep the machine on? Bob Ames RRRR U U SSS H H UNIKS PC Support Center 619-432-6860 R R U U S S H H R R U U S H H UUCP: {cbosgd, ucsd, nosc}!crash!rush!bob RRRR U U SSS HHHHH INET: bob@rush.cts.com R R U U S H H Interstellar Freight Service: R R U U S S H H "We're not afraid of Klingons!" R R UUUUU SSS H H - Doug Miller '78