zonker@freja.diku.dk (Claus Engdahl) (02/03/89)
We need some technical info, to install a 380Mbyte Hitachi SCSI disk on our 3B2-400. Unfortunately we dont have a productspecification, and we're unable to obtain it from our vendor. The SCSI-disk is a: HITACHI DK514C . We need the parameters for the two commands: Format Unit Command (04H) Mode Sense Command (1AH) If anyone has this info (or know where we could obtain it), please reply to: ...uunet!mcvax!dkuug!netpasser (or netpasser@dkuug.dk)
markb@denali.SGI.COM (Mark Bradley) (02/07/89)
In article <4398@freja.diku.dk>, zonker@freja.diku.dk (Claus Engdahl) writes: > We need some technical info, to install a 380Mbyte Hitachi SCSI disk > on our 3B2-400. > > The SCSI-disk is a: HITACHI DK514C . We need the parameters for the > two commands: > Format Unit Command (04H) > > Mode Sense Command (1AH) > > If anyone has this info (or know where we could obtain it), please > reply to: > > ...uunet!mcvax!dkuug!netpasser (or netpasser@dkuug.dk) Format Parm Byte Bit Contents 0 7-6 R = 0 5-0 Page Code = 3 1 Page Length = 0 -13H 2-3 Trk/zone (A) 4-5 Alt. Sec./Zone (B) <How to Round> B/A = 0 --- B=0 0<B/A<=1 --- B=1xA 1<B/A --- B=2xA 6-7 Alt. trk/Zone (round to 0) 8-9 Alt. trk/Vol. (C) = 0-32 <How to round> C/No. Heads x No. Heads (round up) 10-11 Sec./trk = 0 12-13 Data bytes/sec 0100H=256, 0200H=512 14-15 ILV = Don't care 16-17 Trk. skew = 0 18-19 Cyl skew = 0 20 7 SSEC = 0 6 HSEC = 0 5 RMB = 0 4 SURF = 0 3 INS = 0 2-0 R = 0 Mode sens 0 OP code = 1AH 1 7-5 LUN = 0 4-0 R = 0 2 7-6 PCF = 00(current), 01(changable), 10(default), 11(saved) 5-0 Page code = 0,1,2,3,6,3F (Page code 0, no page is xfered.) 3 R = 0 4 Alloc. Len. 5 Ctl Byte = 0 markb -- Mark Bradley "Faster, faster, until the thrill of IO Subsystems speed overcomes the fear of death." Silicon Graphics Computer Systems Mountain View, CA ---Hunter S. Thompson