howell@ecsvax.UUCP (Doc A. Howell) (03/07/89)
Can anyone tell me the switch settings etc... to upgrade a 6300 from 256 to 640K? Thanks. Doc Howell UNCW
mhampson@wpi.wpi.edu (Mark A. Hampson) (03/08/89)
The following are the switch settings fopr an AT&T 6300 with ROM version 1.43.
The Memory switches that you have asked for are not changed from 1.21 to 1.43:
On DIP Switch 0 at 7T:
1-3 system memory
4 64Kx1 or 256Kx1 DRAMS on motherboard
5 numeric Data processor, Intel 8087
6 Serial Comm controller 8250/Z8530
7 Not used
8 Bank 1 occupied/not occupied
System Location sw1 sw2 sw3 sw4 sw8
640K 256K Motherboard +
384K Expansion Borad off on off on off
640K 512K Motherboard
Bank 0 +
128K Motherboard
Bank 1 off on on off off
640K 128K Motherboard
Bank 0 +
512K Motherboard
Bank 1 off on off off off
Hope this helps:
--
Mark A. Hampson WPI Mechanical Engineering
Internet: mhampson@wpi.wpi.edu Worcester, MA 01609 USA
(508) 831-5498
70% of all code is idiot proofing