msewil@ecsvax.UUCP (Charles R. Ward) (04/03/89)
a I own an AT&T 6386 WGS and would like to add 1 or 2 Meg more of RAM to the system. The memory card currently in the computer uses 256K SIMMS (120ns). None of the documentation that came with the computer mentions how to install the RAM and set the DIP switches for a total of 3 or 4 Meg. Any help out there? Also, when I turn on the computer I frequently have to press the reset button to get it to boot properly. Otherwise, the screen is just garbage and the hard disk is never accessed. The system consists of a 1.2M floppy (AT&T's), a 1.44M Mitsubishi floppy, a 40M Seagate FH HD w/WD HD controller, and a Paradise Pro VGA card w/Princeton Ultrasync. Has anyone else experienced this problem? Finally, under Windows/386, floppy access is VERY slow. I'm using the floppy controller on the mother board. Is there a way to defeat the on-board floppy controller and use one from a dual HD/FD controller like the WD?
john@banzai.UUCP (John Canning) (04/04/89)
In article <6758@ecsvax.UUCP> msewil@ecsvax.UUCP (Charles R. Ward) writes: > >I own an AT&T 6386 WGS and would like to add 1 or 2 Meg more of RAM >to the system. If you order the RAM upgrade from AT&T, you will get the instructions for setting the dip switches with the SIMS. You can have 1MB, 2MB or 4MB of RAM on a single board. You cannot install just 3MB on one card. John Canning ...uunet!uvm-gen!banzai!john The People's Computer Company ...attmail!banzai!john Williston, Vermont 802-864-0747