platt@ndla.UUCP (Daniel E. Platt) (07/28/89)
Greetings! I've been having a problem with my trailblazer, and I wonder if anybody knows how to get around this. First the problem: When I run with S53 == 0, I cannot log in from outside. If S53 != 0, cu won't connect to the port. I have another modem that doesn't produce this problem. The question is, is there a way to set things up so that the modem will be reset after a 'cu' was processed? or is there a way around having to reset the modem just to talk to it? (I don't see documentation about internal switches or anything...) I'm running ATT SysV/386 Rel 3.2.1 on an ATT 6386E WGS. The modem you know about. It is attached to the normal system com port. Thanks in advance for any info you care to volunteer. Dan Platt -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- || 1(914)945-1173 || || Dan Platt 1(914)941-2474 || || Watson (IBM) PLATT@YKTVMV.BITNET || || ..!uunet!bywater!scifi!ndla!platt || || || || The opinions expressed here do not necessarily reflect || || those of my employer! || || || -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-