jh@efd.lth.se (Joergen Haegg) (09/10/89)
I have some problems with our 3b2/400. The ctc streamer won't work. Is there anyone who could tell me if this is a hardware or software error? (The problem may have occured during upgrading software, but I don't know, since we hardly use the streamer at all) os: SYSVR3.0 When booting the system the following appears: unknown idcode 0x5 for device in slot 2 equipped device table completion will continue INCLUDE: CTC; device not equipped Driver not found for *VOID* device (board slot 2) SBD Floppy disk 72 Mb disk 72 Mb disk PORTS *VOID* PORTS MAU ct:CTC firmware pump failed on 5 succesive attempts ct:CTC initializzation failed on CTC major 2 -- ============================================================================== Joergen Haegg jh@efd.lth.se postmaster@efd.lth.se System manager @ efd 046-107492 Lund Institute of Technology Sweden ==============================================================================