[comp.sys.att] 386 Configuration

root@mccc.uucp (Pete Holsberg) (10/27/89)

I'm thinking that I could set up a 386 machine running an appropriate version
of *NIX as a host for an Ethernetwork of 20 Zenith ATs.  Would a 33MKHz '386
with 16MB RAM and a 300+MB hard disk do it?  I would need Ethernet hardware
and software, and I'd like to have NFS on top of it.

Would you suggest a 386 configuration -- hw and sw -- that would do the trick?

If one 386 won't do it, could I run 10 ATs Ether'd to a 16MHz 386 (4-8MB, 72MB
HD), the other 10 to a second 386, and the two 386s Ether'd-TCP/IP'd-NFS's
together?

Thanks.
-- 
Pete Holsberg                UUCP: {...!rutgers!}princeton!mccc!pjh
Mercer College               CompuServe: 70240,334
1200 Old Trenton Road        GEnie: PJHOLSBERG
Trenton, NJ 08690            Voice: 1-609-586-4800