robert@csustan.CSUStan.Edu (Robert Zeff) (11/21/89)
We are currently using Link MC5 terminals with an AT&T 63856E. We would like to use virtual terminals with our Links. Does anyone know how to do this with non-AT&T terminals? thanks, -- Robert Zeff (209) 577-4268 voice, FAX: (209) 577-8548 2549 Yosemite Blvd Ste. E {lll-lcc,lll-crg}!csustan!zhome!robert Modesto, Ca. 95354 {lll-lcc,lll-crg}!csustan!robert
fmcgee@cuuxb.ATT.COM (Netnews Administrator) (11/24/89)
In article <1989Nov20.233805.13722@csustan.CSUStan.Edu> robert@csustan.CSUStan.Edu (Robert Zeff) writes: >We are currently using Link MC5 terminals with an AT&T 63856E. We would like >to use virtual terminals with our Links. Does anyone know how to do this >with non-AT&T terminals? >thanks, Normally, this sort of feature is implemented through a special device driver. For instance, with the AT&T 5620 and 630 terminals this is done through the xt/layers device driver. On the 386 console, this is done through features implmented in the console driver (kd). Some ports card manufacturers (for AT-bus machines) offer this sort of feature with their driver software; I know Consensys does, and I believe some of the Bell Technologies cards do as well. AT&T does not provide that kind of functionality with any of the AT&T IPC cards (although you can use the 630 or 5620 to get virtual terminal features remotely off of an IPC 802/900/1600). Another alternative is shell layers, and it's documented in the manual page on shl in section 1 of the User's Manual. Basically it provides a simple way to run multiple sh sessions on any ascii terminal. I don't know if it will be suitable for your needs though, or work with your applications. Hope this answers your question, -- Frank McGee, AT&T Tier 3 Indirect Channel Sales Support attmail!fmcgee