aland@infmx.UUCP (Dr. Scump) (03/13/90)
I'd be interested in hearing from anybody who has one of the 33s (ESDI or Model S) to see if *anyone* has received diagnostics yet. I've been waiting since late December; this is getting ridiculous. I've sent in two separate request cards. I've been running into some *nasty* hardware flaws with the machine and add-ons, and groping in the dark without diagnostics is murder. Example: Note that with memory problems, the POST info is *bogus* (this has been verified with 2 hotline engineers); it frequently gives incorrect failure addresses or *no* addresses at all! On one of my expansion boards, the POST memory scan just stops after 11 MB; no error messages, no nothing. I know there's a board flaw or bad SIMM(s) because if I set it for 8 MB instead of 16, it finds all 8 MB just fine. Another POST gotcha: the counter is only 6 hex digits! If you hit a memory error above 16MB, the leading hex digit of the address is *dropped*. Therefore, if you have a memory problem in the 10th logical SIMM accessed by an expansion board, instead of reporting address 10.....H, it will be 1.....H, which makes you think it's the second motherboard SIMM ! If anybody has the final versions of the Customer and System Diagnostics disks, I would consider it a big favor if you could send me copies. I am currently using beta versions of both, and they seem a little flaky... -- Alan S. Denney # Informix # aland@informix.com # {pyramid|uunet}!infmx!aland CAUTION: Objects in terminal are closer than they appear... Disclaimer: These opinions are mine alone. If I am caught or killed, the secretary will disavow any knowledge of my actions. "These tests will have no effect on your grades. They will merely determine your future social status and financial success, if any."