[comp.sys.att] Memory Boards for 6386s

aland@infmx.UUCP (Dr. Scump) (03/27/90)

Quick Question, for those who know:

Will the 4/16 MB Memory board that ships for the 6386E/33s (Comcode
406130534, PE Code 37337) work in the old 16 MHz 6386 WGS?

--
Alan S. Denney # Informix # aland@informix.com # {pyramid|uunet}!infmx!aland

 "The driver says, 'One more cup of coffee and I'll be all right...'
  'Pop a Bennie, another Bennie'..."                - The Bobs, "Bus Plunge"

vancleef@pawl.rpi.edu (David A. Van Cleef) (03/28/90)

In article <3702@infmx.UUCP> aland@infmx.UUCP (Dr. Scump) writes:

   Quick Question, for those who know:

   Will the 4/16 MB Memory board that ships for the 6386E/33s (Comcode
   406130534, PE Code 37337) work in the old 16 MHz 6386 WGS?

No, no, a thousand times no.  The AT32 bus connector in the 6386/33 is an
86 pin connector, as compared to the PCET bus, which has only 40 connectors
in the 32 bit extension.  The pinouts are documented on page 4-7 of the
6386/33 Hardware Reference Manual.