harter@ficc.ferranti.com (ron harter) (07/24/90)
Hello Folks, I am once again requesting help. I have installed HDB's UUCP package on the pc7300/3b1 machine. The problem is that the phone manager is preventing UUCP from accessing the phone line. Is there a patch out there somewhere that will fix this or did I configure something incorrectly? The other problem I have is when I set up a dial out line with the phone manager or UUCP either one it does not accept the *70 prefix to disable call waiting. Does anyyone know of a fix for this or is it a condition I will have to live with. Thanks in advance =============================================================================== | Ron Harter | tongue tied and twisted just an earth| | Ferranti International Controls | bound misfit .. I | | harter@ficc.ferranti.com | David Gilmour | ===============================================================================
donlash@uncle.uucp (Donald Lashomb) (07/24/90)
In article <SAV4VOE@xds7.ferranti.com> harter@ficc.ferranti.com (ron harter) writes: [...] >I am once again requesting help. I have installed HDB's UUCP package on the >pc7300/3b1 machine. The problem is that the phone manager is preventing >UUCP from accessing the phone line. Is there a patch out there somewhere that >will fix this or did I configure something incorrectly? [...] Are you using a single telephone line setup (ph0 for everything)? If so, you must manually switch the line from VOICE to DATA mode in order for uucp to access the line (use the phtoggle command). I too have HDB on my 7300. I've had a few minor glitches, but nothing that detracts from its usfulness. hope it helps, -Don