ibarra@DPW.COM (Michael Ibarra) (12/06/90)
HELP ...
I have just purchased an AT&T 3B2/300 with a 36 MB HD, 2 MB RAM, Port
expansion card & Network interface card. This system *DOES NOT* have the
operating system with it (I know that this is unusual!) so I am in the market
for this. I do however have access to several 3B2 manuals (system admin & utilities vol's #1-3) I need to know as much information as possible about this machine. I wish to know the processor type and if it is possible to load XENIX into it and as much information as possible regarding its hardware listed above. I understand that the serial connections are of RJ-11 type and also wish information
on building a cable to convert this to DB-25 as I am connecting a VT220 terminal
to the console and serial ports. I would like to add an additional hard drive tomake room for the development set that I am also looking for.
I know that I ask for alot and I really appreciate all the information sent to me.
uunet: {!cmcl2,uunet}!esquire!ibarra or internet ibarra@dpw.com
VOICE_LINE: (212)530-4119
Thank you,
Mike Ibarrascott@skypod.uucp (Scott Campbell) (12/08/90)
In article <2899@esquire.dpw.com> ibarra@DPW.COM (Michael Ibarra) writes: >HELP ... >I have just purchased an AT&T 3B2/300 with a 36 MB HD, 2 MB RAM, Port >expansion card & Network interface card. This system *DOES NOT* have the >operating system with it (I know that this is unusual!) so I am in the market Is there anything you can do with a 3B2 without AT&T UNIX. Has anyone ever run a different OS (or even something non-AT&T) on a 3B2? Just curious, I have a 3B2/400..... scott -- Scott J.M. Campbell scott@skypod.uucp Skypod Communications Inc. (416) 961-3847 57 Charles St. West, #1310 nyama!skypod!scott@epas.utoronto.ca Toronto, Ontario {scocan|becker|problem|torag|nyama}!skypod!scott