morgan@ms.uky.edu (Wes Morgan) (03/23/91)
This is really, really strange. I installed the DMD Core Utilities on a 3b2/600. When I tried to reboot after installing, I received the dreaded DIAGNOSTICS FAILED. I booted from firmware, and every- thing seemed fine. I then began using a 5620 with 'layers'. No problems were noted. Now it gets weird. I finally got a clean reboot (DIAGNOSTICS PASSED). The 3b2 then booted from /etc/system, and the changes made in the in- stallation of the DMD utilities took effect. Now 'layers' won't work.......it puts up the green background, and then promptly hangs. Suggestions? -- morgan@ms.uky.edu |Wes Morgan, not speaking for| ....!ukma!ukecc!morgan morgan@engr.uky.edu |the University of Kentucky's| morgan%engr.uky.edu@UKCC morgan@ie.pa.uky.edu |Engineering Computing Center| morgan@wuarchive.wustl.edu Curator of the benchmark archives at wuarchive.wustl.edu <128.252.135.4>