mdavis@pro-sol@crash.UUCP (Morgan Davis) (11/26/86)
My 212 upgrade card came with a really cheap ribbon cable connecting the main board to the 212 card. As Mel Moy (melmoy@nprdc) stated, it is easy for the wires to come loose inside the connectors. THey aren't soldered -- they use those cheap friction clamps to hold them in. What I did is made sure all the connections were in place and tight. Then I put a drop of solder onto each wire where it slides into the connector clamp. The Apple Cat works just fine now, and has been for over a year since I did this. -Morgan Davis mdavis@pro-sol