[comp.sys.apple] DCOM 3.3 and IIGS

CDTAXW@IRISHMVS.BITNET (01/06/87)

It runs very well on a IIGS - no problems whatsoever
encountered using a SSC in slot 2...

Mark

ralphw@ius2.cs.cmu.edu (Ralph Hyre) (01/07/87)

In article <8701051725.aa01137@SPARK.BRL.ARPA> CDTAXW@IRISHMVS.BITNET writes:
>It runs very well on a IIGS - no problems whatsoever
>encountered using a SSC in slot 2...

Doesn't DCOM have a driver for serial interfaces that follow the pascal
firmware protocol?  Seems like you could use the built-in (Zilog SCC)
serial interfaces if that's the case (and Apple didn't break their own
rules again).


--
					- Ralph W. Hyre, Jr.

Internet: ralphw@ius2.cs.cmu.edu    Phone: (412) 268-2847 [CMU-BUGS], 268-3275
Amateur Radio: KA3PLY temporary KT (c/o W3VC, CMU Radio Club, Pittsburgh, PA)
-- 
					- Ralph W. Hyre, Jr.

Internet: ralphw@ius2.cs.cmu.edu    Phone: (412) 268-2847 [CMU-BUGS], 268-3275
Amateur Radio: KA3PLY temporary KT (c/o W3VC, CMU Radio Club, Pittsburgh, PA)