halloran@unirot.UUCP (Bob Halloran) (01/09/87)
I am planning to buy a ][GS system soon. I am planning to get the SCSI interface card in anticipation of adding a hard drive later. I would like to be able to buy a winchester off the shelf, add a generic SCSI controller, and have it go. My questions are: o Are there any Apple-specific files that are expected to be on the disk at installation that would preclude this? o Does the software expect any special initialization to have been performed on the drive prior to installation? o Are there any gotchas in the SCSI driver that would preclude my using a larger drive than Apple offers (i.e. 20 Mb)? If people are interested, I will post summaries to the net. Thanks in advance to all. Bob Halloran, Consultant ========================================================================= UUCP: rutgers!unirot!halloran DDD: (201)251-7514 eve ET CSNet/ARPA: unirot!halloran@rutgers.edu USPS: 19 Culver Ct, Old Bridge NJ 08857 Disclaimer: My opinions are my own. Quote: "If a nation expects to be ignorant and free, in a state of civilization, it expects what never was and never will be." -- Thomas Jefferson