BRESNAHA@BCVAX3.BITNET.UUCP (01/26/87)
I have run into a few problems with DCOM 3.3, and wanted to know if anyone has encountered, or better yet solved these problems. First, the dump to printer function using open-apple P, doesn't work correctly with my ML-92 and Grappler+. The problem appears to be that no linefeeds are sent to my printer. Anyone know of a slight fix for this? Second: when using full screen editing in EDT, I run into problems with screen garbage. This only happens when I use the arrows and the open apple keys. Is it my AE Ramworks card, my modem, or a bug?? This is the most anoying problem. I get the best results if I hit the arrow key very slowly. Anyone encounter this problem? I used the beta test version, and never encountered this problem. I hope it is in the software, and hence can be easily (I hope) fixed. Please post all replies on the net. --Scott Bresnahan
SJDMK@uno.BITNET.UUCP (01/30/87)
I've encountered the same problem with the arrow keys mentioned earlier.
If, while using a VAX EDT editor, you hit the arrow keys too quickly, you
get some characters inserted. If you do a screen refresh, the characters
are no longer there but at 300 baud, a screen refresh takes quite a bit
of time.
Are there any quick fixes to this problem?
Steve
Steven J. Dawson
SJDMK@UNO.BITNET