ELORANTA@BRANDEIS.BITNET (01/09/87)
To my last question about new kermit: Yes, I ment kermit 3.73 ...
------------------------------
If I don't want that reset goes to the monitor should I
replace the BRK instruction with NOP that is at the beginning
of reset handler ?
Jussi.balamac@ATHENA.MIT.EDU.UUCP (03/24/87)
Two questions about Kermit 3.73 (I think sources were posted to the net a month or two ago): 1) With the current version, there is no way to dial out of Kermit. Is there a version floating around that will allow me to use the autodial capability built into my Avatex 1200hc (Hayes compatible)? It would be much easier to be able to dial into the local network from within Kermit. 2) Does anyone know if there is a driver available for the IIgs modem port? Thanks in advance. Brian LaMacchia ==================================================================== | Brian A. LaMacchia -- 450 Memorial Drive, Cambridge, MA 02139 | | ARPA: balamac@athena.mit.edu | | UUCP: harvard!--\ | | rutgers!---\ | | seismo!------mit-eddie!mit-athena!balamac | ====================================================================
ranger@ecsvax.UUCP (03/26/87)
If you have a Hayes compatible modem, type ATDT 123-4567 to dial the number in touch tone or ATDP to dial pulse. You do this after you type C to connect from the Kermit prompt. Kermit doesn't auto-dial from a phone book but you can dial from within the program with no problem. I too am interested in a //gs driver. I haven't tried the Super serial driver but I understand that it doesn't work with the //gs. I also haven't had time to write a driver of my own. If anyone has please post it. Thanks, Rick Fincher ranger@ecsvax