ranger@ecsvax.UUCP (Rick N. Fincher) (05/07/87)
Access II: Configuring version 1.2 on an Apple IIGS
Apple has issued an upgraded version of Access II for support of the Apple
IIGS internal modem port.
While version 1.2 is essentially the same as the previous version of Access
II, sucessfully using version 1.2 constrains the IIGS system in the
configuration of slots 1 and 2. Access II works properly when slots 1 and 2
are set up in their default configurations from the Control Panel:
Under the 'SLOTS' menu item:
----------------------------
Slot 1: Printer
Slot 2: Modem
Slot 7: Your Card
Under the 'Modem Configuration' menu item:
------------------------------------------
Device Connected: Modem
Also, if you are using AutoDial to dial out, you must wait about 30 seconds
before you will hear a dial tone and the number dialed. If after 30 seconds
you don't hear the dial tone, check the cable connections and settings of the
IIGS Control Panel and Access II and try again.
Apple Technical Communications