[comp.sys.apple] Request for ProDOS Bulletin Board Software Info

dowst@JPL-VLSI.ARPA (07/01/87)

Two Apple Clubs in the local area are looking for ProDOS-based Bulletin 
Board Software.  Our requirements are as follows:

     1.   Support for XMODEM protocol, preferably with DOS 3.3, ProDOS 
          and Binary 2 extensions.

     2.   Support for a BBS message section with 10 or more sub-boards.

     3.   Adequate security features including at least a 6 character 
          password, audit files, and ability for the SYSOP to terminate 
          an incoming call quickly.

     4.   Runable on an Apple II+ whith 64k RAM and a Sider hard disk.

     5.   Source code in BASIC or PASCAL available so that enhancements 
          or updates can be added easily.

The following features are desireable, though not strictly necessary:

     1.   Support for XMODEM Batch and/or YMODEM protocols.

     2.   Ability to act as a Kermit Server.

Cost should be < $150.

I will consolidate all responses and post the results.

Please respond through the net or via GEnie.  Thanks,

Henry Dowst
GEnie: DOWST

mkao@pnet01.CTS.COM (Mike Kao) (07/06/87)

I would say that GBBS 1.3 would be your best bet. I have worked with this
system before and have found it very versatile. If you want, I can probably
dig up the address of the company....
Please reply via e-mail instead of the net. Thank you.

                                        -- Mike Kao

UUCP: {cbosgd, hplabs!hp-sdd, sdcsvax, nosc}!crash!pnet01!mkao
ARPA: crash!pnet01!mkao@nosc.mil
INET: mkao@pnet01.CTS.COM