Todd_A._Bakal@UB.CC.UMICH.EDU.UUCP (07/08/87)
This is my first posting to the net. I just recently got a IIgs which I'd
like to use Kermit on. My problem is that I have a CCS 7711 serial card
which is not on the list of supported drivers. I have tried all
five (including the 7710 one) with no luck. The best possibility
thus far has been to use the Microtek driver which allows me to
speak to the modem without freezing up. But, when I issue a ATDT
command, the modem dials, and the computer itself stops beeping
continuously. The modem does not connect from that point on.
My card is set to use internal driver #1 (out of 7). Kermit works
on many other II computers on campus, so I have to believe that it
is the combination of the 7711 and the GS, since the card worked
previously when it was in my II+. Several other comm programs
do the same thing now including a locally written one, and DCOM.
The only program that will function is Ascii Express. But, I need
Kermit.
All tips, or help, will be greatly appreciated.
Todd A. Bakal
U of Michigan Apple User's Group
Ann Arbor, MI
Todd_A._Bakal@ub.cc.umich.edu