2QZNHONE@UKANVAX.BITNET (10/22/87)
I just purchased the SuperSonic Stereo card for the IIGS and the SuperSonic Digitizer add-on board. Everything worked great when I plugged in the Stereo card. Then I went on to using the Digitizer and I ran into a problem. I had already input a sound from my Sony Walkman and it was saved on disk. I selected Playback Mono after the sound had been loaded and the sound came out both speakers. When I selected Playback Mono again it ONLY played out one of speakers. What is going on? To make a long story short, when you load the Digitizer Sound Editor it says Loading Ram based Tools....... If you have the new ROM upgrade on your computer you must load the System Disk 3.1 first then run the Digitizer Sound Editor from System Disk 3.1 This takes care of the problem. I'm not really sure why though. Does the System Disk 3.1 have patches for the New ROM? Does the new ROM have problems This is just information for you all that will probably purchase the SuperSonic Stereo Card and the SuperSonic Digitizer. Have fun!!!! Todd Smith University of Kansas 2QZNHONE@UKANVAX.BITNET
ranger@ecsvax.UUCP (Rick N. Fincher) (10/24/87)
At AppleFest the folks at MD Ideas said that their software had minor incompat- ibilities with the new ROM. There is an upgrade, call the company for details. This may be why you are having problems. Rick Fincher ranger@ecsvax