gregp@pro-carolina.cts.COM (Greg Prevost) (11/28/87)
I have an Apple Dot Matric Printer but no manual on it. It seems that the internal 8k print buffer is turned off and I do not know the corrent switch to turn it back on. (Thats what I get for buying it used) PS For all you adventure fans, the long wait is finally over. Wizardry IV is now out. The game is definetly challenging enough. And Sir Tech was nice enough to leave it with no copy-protection except a password scheme so backups are no problem. By today I should have it patched to remove even that so I don't have to look up any numbers at all. To all you like me who have awiated the return of Werdna for all these 3+ years, it is here.
forde@EGLIN-VAX.ARPA ("MAJ ERIC S. FORD") (11/29/87)
For Greg Provost..... I don't have a complete set of docs for the DMP but from the refference card: DIP Switch configurations - SW1: -------------------------------V ------
forde@EGLIN-VAX.ARPA ("MAJ ERIC S. FORD") (11/29/87)
I tried this earlier and line noise bounced me off the system. Here we go
again.
9]For Greg Provost.....
From the Apple DMP Reference card:
SW1: (1 = switch closed 0 = switch open)
---------------------------------------------------------------------------
8 | 7 | 6 | 5 | 4 | 3 - 2 - 1c------------------------------------------/-KKKKKKKKKY))))))))))))))))Y))))x1: CR+LF |1:Print On |1:CR/LF |1:Ignore |1:72 Line| Char. Set Opt.
| CR,LF,VT,| with | DC1,DC3| TOF/TOF|000:Eng 001:Ital
| FF | Buffer| | |011:UK 100:Ger
| | Full | | |101:Swed 110:Fr
--------------------------------------------------|111:Spanish
0:CR only|0:Print |0: No |0:Enable |0:66 Line|
| after CR | CR/LF | Remote | TOF/TOF|
| | on | select/| |
| | buffer| desel. | |
---------------------------------------------------------------------------
SW2:
---------------------------------------------------------------------------
8 | 7 | 6 | 5 | 4 - 3 | 2 | 1
---------------------------------------------------------------------------
1:Unidirec-|1:Power on|1:7 bit|1:Propor-| NOT USED |1:Single|1:Slash
tional | Select | data | tional | | Line | Zero
| | | | | Buffer|
---------------------------------------------------------------------------
0:Bidirec- |0:Power on|0:8 bit|0:10 cpi | |0:N-line|0:Do not
tional | Deselect| data | | Not Used | buffer| slash
| | | | | | zero
---------------------------------------------------------------------------
Hope this helps.
Eric S. Ford
------