dale@pro-colony.UUCP (System Operator) (02/12/88)
For AppleWorks v2.0
Press Reset:
then from the monitor type.....
ff59g
3 Ctrl-P
2f0: 2c 83 c0 2c 83 c0 4c 27 11
2f0g
For AppleWorks v1.3 (and earlier I think)
Press Reset
then from the monitor type.....
ff59g
3 Ctrl-P
2f0: 2c 83 c0 2c 83 c0 4c 33 10
2f0g
You should now be back at the main menu.
If you are using an Aux slot RAMcard you may also want to add:
c073:0
after typing the ff59g. This should reset your card back to bank 0 so that
your 80 column display will be correct. Although if you _have_ to do this
don't expect it to always work.
If anybody is interested I also have some instructions on how to recover
disk(s) that have been segmented with the AE AppleWorks Expander software.
Your first disk must be intact. It will help you recover any disks you have
as long as they are in order. ie: if you have disks 1,2,4,5 of a 5 disk set
you can only recover disks 1 and 2. If anybody wants it it is posted on
pro-colony or I could send it through the net.
dale