leach@nyevax.CAS.ORST.EDU (Tom Leach) (08/24/88)
Hello, I have a Franklin power supply and an Apple II+ with a blown PS. I would like to rewire the franklin supply to work on the apple but I don't have the connector pinout. Does anyone have the diagram for the power connector for a Franklin? There is some kind of short protection in the PS that prohibits any voltage output unless there is a drain so I can't just hook up my meter and read the voltages. The problem is, I don't want to hook the PS up to my apple unless I know that the voltages are correct. The connector is arranged like this... black black yellow red brown orange This is the view when looking at the connector end. The connector looks something like... _________ |bl bl| | |_ |y r_| | | |br o| --------- Any help would be appreciated. Tom Leach Internet: leach@chroma.CS.ORST.EDU UUCP: {tektronix, hp-pcd}!orstcs!chroma.CS.ORST.EDU!leach ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Middle-of-the-road, man, it stanks. Let's run over Lionel Richie with a tank. B. Catt, Deathtongue. (c 1986)
leach@nyevax.CAS.ORST.EDU (Tom Leach) (08/27/88)
Sorry folks, my previous posting had an incorrect reply-to address. It
should have been leach@nyevax.CAS.ORST.EDU NOT leach@nyevax.CAS.ORST.EDU.UUCP
Sorry for any bounces this caused.
Tom Leach
Internet: leach@chroma.CS.ORST.EDU
UUCP: {tektronix, hp-pcd}!orstcs!chroma.CS.ORST.EDU!leach
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Middle-of-the-road, man, it stanks. Let's run over Lionel Richie with a tank.
B. Catt, Deathtongue. (c 1986)