daveharv@pro-novapple.UUCP (System Administrator) (09/13/88)
>I do not own AE Pro (I own Mousetalk... a sweet term program) but I have a >question from a novice user in our user group that I am unable to help with. >She is trying to get AE to do VT-52 emulation and it just does not seem to >work for her. She selects something called UPDATE MACROS which allows her to >SET EMULATION and when she selects VT-52 nothing loads off of disk, nor does >it work... >I may be a little shakey about the order or sequence of what it is she is >doing, it is so much easier with Mousetalk to do this sort of thing and I >cannot help her. >So in effect I am asking... how does one do VT-52 with AE Pro? In order to make AEPRO emulate a VT-52, two steps must be taken. The first step is to invoke the U command with gets you to the MACRO Command MENU after which, the S command (set terminal parameters) is issued. From the table you select the DEC VT-52 as the input terminal. The output terminal is what you use to do the emulation (i.e. 80 col card). After that selection is all done, the second step is to get back to the macro command menu and select $ which turns on the emulation mode. The user can then dial out and connect to a system and the VT-52 emulation will be in effect. proline: pro-novapple!daveharv uucp: {cbosgd, sdcsvax, nosc}!crash!pro-novapple!daveharv arpa: crash!pro-novapple!daveharv@nosc.mil Internet: daveharv@pro-novapple.cts.com Northern Virginia Apple Users Group >pro-novapple< 703-671-0416/300-2400 baud