DMG4449@RITVAX.BITNET (11/17/88)
I have finally escalated to the ranks of an Apple //gs, and I am having
a very annoying problem:
I have an Apple 3.5" drive and a cheapo 5 1/4 Meiji drive with GS connector
that hooks into the smartport. Occasionally, when I try to access my 3.5",
both my 3.5" and 5 1/4" start spinning and lock up. I press reset and
then it no longer recognizes the 3.5" drive. I've tried setting the
control panel to "your card" for the slot 6 to disable the 5 1/4" but it
still doesnt work. I have to power off and on again in order to use my
3.5" again. Is there a solution to this problem? or at least a way I
can use the 3.5" w/o cold booting- its a real annoying pain
Also, on a somewhat unrelated topic:
Has anyone with
a US Robotics Courier HST been able to
connect with applelink? They were of no help getting me set up
Thanks in advance,
Daniel
Daniel M. Greenberg -=- Rochester Institute of Technology '92
US MAIL : CPU #1026 25 Andrews Memorial Dr. Rochester, NY 14623
BITNET : DMG4449@RITVAX
INTERNET : dmg4449%ritvax.bitnet@CORNELLC.CCS.CORNELL.EDU
UUCP : {psuvax1,mcvax}!ritvax.bitnet!dmg4449
Compuserve : 71641,1311 | GEnie : D.GREENBERG2 | PHONE : [716] 475-4295