NU133716@VM1.NODAK.EDU (Brian Glaeske) (11/21/88)
Bill;
I don't know if this will help or not since I forgot where I put all
the information you wanted.
The mouse connector has 9 pins, while the old I/O had 16.
I believe that I found through expermenting on my //c that the new
connector was missing the AN0-AN3. AN0-AN3 are announciator outputs.
They also didn't include the C040 STROBE and left off pin 9 and 16 which
had no internal connections.
I'm sorry I can't tell you where the remaining pins are on the 9 pin
output.
Brian Glaeske nu133716@vm1.NoDak.edu