smw@whuts.ATT.COM (WINCKLHOFER) (01/24/89)
I am having trouble getting Kermit V.3.82 to work on my II+ with my Zoom modem. The modem is Hayes Micromodem //e compatible. Here is what happens. When I type CONNECT the program goes to the connect screen and say there will be a 35 sec delay. However, it turns on the modem which comes up with a dial tone, and in the process of waitng for Kermit, the phone company interupts with the if you are having trouble dialing message, which the modem hangs up on. Next, after what I assume is the 35 sec delay the modem is activated again and I am prompted (by the modem ?) for the number to dial. The modem will then dial the numbers I enter as I enter them in pulse mode, despite all efforts to use tone. Finally, when I do get a connection the mainframe refuses to recognize my password. This may be caused by either sending garbled or uppercase ony text, I cannot tell because the password is not echoed. The keyboard is set to 2p and the driver is for the micromodem. Is there anyway of getting rid of the delay? How can I dial in tone mode? Why won't the mainframe accept my password? Any help will be appreciated. Thank you ahead of time. Scott --------------------------------------------------------------------------- Scott Wincklhofer AT&T Bell Laboratories Whippany (201) 386-5094 whuts!smw