caralb@pro-novapple.UUCP (Caral Bennett) (02/17/89)
Subject: Print Shop problems I'm having some problems using Print Shop and Print Shop Companion, and I was hoping that some of you out there might have some idea what the problem is... I can create something using the Print Shop or the Companion, and everything goes fine until I try to print it out on my printer, and then all I can get is gibberish. I have tried to configure Print Shop to my setup (Apple //e, 2 disk drives, Epson LQ-800 [like a RX, FX, or MX series], and a Star Micronics Grafstar parallel printer card), but it doesn't seem to make any difference. I've double-checked the DIP switches on my parallel card, and on the printer, and I can't find anything wrong there. I've even tried other settings in the Print Shop configuration, without any luck. If anyone has any ideas whatsoever, my thanks in advance for your help! __________________________________________________________________________ | | | | proline: pro-novapple!caralb | "It's simple, | | uucp: crash!pro-novapple!caralb | | | arpa: crash!pro-novapple!caralb@nosc.mil | but it works!" | | Internet: caralb@pro-novapple.cts.com | [usually] | |__________________________________________|_______________________________|
jimo@rosevax.Rosemount.COM (The Eternal Optimist @ the Infernal Machine) (02/22/89)
Now that you mention it, I've never been able to make a backup of the disks following their instructions. All I get is a flash of screen and it's bypassed. If anyone has experienced this, please assist in this. -- "Save your edits every 5 minutes or 5 lines, whichever comes first."