cs211s27@uhccux.uhcc.hawaii.edu (T.Koseki) (05/19/89)
I'm pretty new at this xmodem stuff, so I need a lot of help trying to download programs from the "comp.binaries.apple2" newsgroup. I've tried downloading with the "xmodem sbc <filename>" command and using my Datalink 2400 modem to receive with. The transfer can only be engaged when the communications software disk is in the default drive (usually 1, I've got a Duo-Disk setup). I've tried formatted disks but the transfer always aborts. I've tried using a copy of the communications software disk with all "unnecessary" stuff deleted so the file can fit. The standard com disk is almost full so it usually aborts because of no-space-on-disk warnings. This is really frustrating to deal with. I know I need to download BinSCII, BLU, and ShrinkIt to "decode" the stuff in comp.binaries.apple2. Any suggestions... Please e-mail me directly. Thanx! +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+ | | | | INTERNET: cs211s27@uhccux.uhcc.hawaii.edu | "If you can't crank it, yank | | ARPA: uhccux!cs211s27 | it!" -Car Audiphile | | UUCP: {backbone}!ucsd!nosc!uhccux!ics211s27| | | BITNET: cs211s27@uhccux.bitnet | To be good at 9-ball, one | | CSNET: cs211s27@hawaii.csnet | must have luck; but then again,| | | luck is an art! | +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
matthew@sunpix.UUCP ( Sun Visualization Products) (05/20/89)
In article <3971@uhccux.uhcc.hawaii.edu>, T.Koseki writes: | I'm pretty new at this xmodem stuff, so I need a lot of help trying to download | programs from the "comp.binaries.apple2" newsgroup. I've tried downloading | with the "xmodem sbc <filename>" command and using my Datalink 2400 modem | to receive with. The transfer can only be engaged when the communications | software disk is in the default drive (usually 1, I've got a Duo-Disk setup). | I've tried formatted disks but the transfer always aborts. I've tried | using a copy of the communications software disk with all "unnecessary" stuff | deleted so the file can fit. The standard com disk is almost full so it | usually aborts because of no-space-on-disk warnings. This is really | frustrating to deal with. I know I need to download BinSCII, BLU, and | ShrinkIt to "decode" the stuff in comp.binaries.apple2. Any suggestions... | Please e-mail me directly. Thanx! Your problem is rather simple. Since you don't state the comm package you are using, I'm assuming it is the one delivered with the Datalink 2400 modem. This telecom program is just a modified version of the Talk-is-Cheap program by Don Elton. (Don lisenced it to Applied Engineering) What you need to do is set the working pathname. The default working pathname is the one from which the comm program was started out of. To set a new default, press [OA]-[N]. You'll get a prompt box stating the current default, and a line to type in a new one. All the commands for the comm program are listed shown if you press [OA]-[?]. -- Matthew Lee Stier | Sun Microsystems --- RTP, NC 27709-3447 | "Wisconsin Escapee" uucp: { sun, mcnc!rti }!sunpix!matthew | phone: (919) 469-8300 fax: (919) 460-8355 |
dale@pro-colony.UUCP (System Administrator) (05/21/89)
Network Comment: to #6341 by pnet01!crash!humu.nosc.mil!uhccux!cs211s27 You need to use the open apple-N command to change the prefix. You can get a list of commands by pressing open apple-? You can get a list of the volumes online by using the open apple-V command. Also, there is a help file on the disk that explains the various open apple commands in the program. dale@pro-colony