eddie@CC.MSSTATE.EDU (Eddie Mikell) (06/09/89)
The learning lab here on campus has acquired some apple ii gs and a laserwrite IInt. I am not an apple II or prodos expert, but have been able to get the system utilities to download the imagewriter emulator to the laserwriter via Chooser. Here comes the problem. After exiting the utilities, I boot the appleworks diskette, set up a printer to work with appletalk (slot 7). Then I attempt to print to that port and nothing happens. I must be connected right since I get the "Imagewriter emulator successfully loaded" message on the laserwriter. Any suggestions? Also, choosing the laserwriter with the systems utilities manual everytime I boot the GS, and before I load appleworks is getting to be a pain in the rear. Is there a better way? Thanks! Eddie Mikell Mississippi State University Eddie@cc.msstate.edu internet Eddie@msstate bitnet