aaron.p@pro-ldm.cts.com (Aaron Putnam) (06/28/89)
I need some serious help: does anyone have drivers for this card? The
manual is not very helpful, and the card's ROM is obviously messed up. It may
be because it's running in a II+, and was made for a //e, but I believe there
should be a way to make it usable by ProDOS. I have used it successfully with
Ascii Express Pro, but I am attempting to write a bulletin board program, and
the drivers in AE are all in one file. I can't find them, so if anyone out
there has any information, it would be greatly appreciated.
Thanks in advance,
--=*>Azerov<*=-- (Aaron Putnam)
UUCP: crash!pro-ldm!aaron.p
ARPA: crash!pro-ldm!aaron.p@nosc.mil
INET: aaron.p@pro-ldm.cts.commatthew@sunpix.UUCP ( Sun Visualization Products) (07/02/89)
In article <8906280057.AA08022@crash.cts.com>, Aaron Putnam writes:
[Problems with AST Multi-I/O card deleted]
I think I know what your problem is. Most communications packages assume
that you are using an Apple Super Serial Card (SSC) or compatible, based
on the 6551 ACIA. The AST Multi-I/O card is 6850 ACIA based, and probably
more along the line of Apples older Communications card.
What you will need to do is review an old Apple Communications manual, and
a 6850 ACIA data sheets. I can help you with both if need be.
--
Matthew Lee Stier |
Sun Microsystems --- RTP, NC 27709-3447 | "Wisconsin Escapee"
uucp: { sun, mcnc!rti }!sunpix!matthew |
phone: (919) 469-8300 fax: (919) 460-8355 |